A range of
boring cutters to suit the popular sizes of concealed
cabinet hinges and KD fittings. All sizes have a centre
point and two scoring cutters and produce a clean flat
bottomed hole in all timbers and particle boards.
Cutters up to 26mm diameter may be used at speeds up to
25,000 rpm, however the larger cutters should ideally be
used at speeds below 10,000 rpm in a pillar drill or
similar, although a variable speed routing machine is
also suitable. In addition to hinge sinking, these
cutters are also ideal for any operation requiring a
clean bored hole with a flat bottom.
The 30410010 has
a 10mm shank, with flat and height adjustment screw, for
use in multi-boring machines etc. |
 |
|
Home
Hinge Boring Bits